TOTAL FLOOR CARE | REVIVE
REVIVE YOUR FLOORS WITH RENU AND REFRESH
While our finishes are not likely to wear through, microscopic wear and surface scratches can be frustrating and dull the finish. Hallmark Floors has a product to assist you in keeping your floors looking their best. ReNu and ReFresh products Revive the floor for years to come.
ReNu Cleaner
HARDWOOD | RE NU FOR NU OIL® FINISHED FLOORS
ReNu for Nu Oil® floors is a specially made quality oil refresher designed with nourishing properties which fortify and enhance the finish of your Nu Oil® hardwood floor to protect against dirt and penetration of liquids, this contains no detergents, so should be used to enhance your floors and not clean them. Revive your Nu Oil® floors with Re Nu refresher.
WARRANTY INFORMATION
1. Always make sure your Nu Oil® hardwood floor has been vacuumed clean and free of dirt and debris and cleaned with Nu Oil® Natural Cleaner prior to application of ReNu.
2. ReNu Nu Oil® should always be shaken well before using.
3. Simply spray the ReNu Nu Oil® onto your oiled hardwood floor and apply in sections using a terry cloth boot mop.
4. Allow the floor to dry for 60— 90 minutes before walking on it.
5. Every 4 months, reapply ReNu Nu Oil® to help restore the richness and beauty of your oiled hardwood floor.
ReFresh Cleaner
HARDWOOD | REFRESH FOR HARDWOOD TRUEMARK® FINISHED FLOORS – GLAZE TEK & POLY
TrueMark® Refresh is used for periodic maintenance of Hallmark Floors’ finished with TrueMark® Poly & GlazeTek® factory-applied finish. May also be used on floors coated with the Hallmark XYZ wood flooring recoat/restoration system. TrueMark® Refresh contains polyurethane particles designed to add an extra layer of protection and shine to high-traffic areas that have become worn.
WARRANTY INFORMATION
1. Provide adequate ventilation while using TrueMark Refresh. Use protective gloves and goggles for protection from splashing.
2. Carefully pour TrueMark® ReFresh in a line onto the floor. Do not use too much, or risk leave puddles on the floor.
3. Using the micro fiber mop, apply TrueMark® ReFresh in a motion that follows the lengthwise grain of the floor. Do not apply across the grain.
4. Allow Floor to Dry. Once dry, resume regular maintenance. DO NOT ALLOW further use of acrylic wax polish on the floor.
• Heirloom Engineered
• Moderno Engineered
• Heirloom Engineered
• Novella Engineered (Hickory & Maple Only)
• Ventura Engineered (Maple, Hickory & Walnut Only)
• Monterey Engineered
• Silverado Engineered
• Chaparral Engineered
VINYL | REFRESH FOR SURFACE GUARDIAN FINISHED FLOORS
Use Surface Guardian Refresh for periodic maintenance of Hallmark Floors Luxury and RIGID Vinyl Flooring, finished with Surface Guardian® PRO & Basic factory applied finish. Can also be used on floors that have been coated with Hallmark ABC Luxury and RIGID resilient restoration system. Surface Guardian Refresh contains polyurethane particles designed to add an extra layer of protection and shine to high-traffic areas that have become worn.
WARRANTY INFORMATION
1. Thoroughly vacuum the floor with a canister vacuum with a soft brush attachment (use of a vacuum with a power brush head will damage the floor surface). Removal of all loose surface dirt prior to starting is critical to the success of renovation.
2. Select a high-traffic area where the appearance of the floor is most-noticeably effected. Using Hallmark TrueClean® Wood & LVT Cleaner, spray mist an area of the floor and rub vigorously with a clean white towel. If the towel is noticeably dirty, the floor must be cleaned prior to application of Surface Guardian Refresh.
3. Shake spray bottle Trueclean® Wood & LVT Cleaner: Before use, gently shake the bottle (30s) to make sure the cleaning agents are well-mixed.
4. Pre-Surface Guardian Refresh Cleaning: Follow the instructions on the bottle of Hallmark Trueclean®. The cleaner can be sprayed directly on the floor in a fine mist. The mop system consists of a micro fiber applicator head. The micro fiber mop head must be moistened with water and well wrung out before applying the cleaner.
5. Wipe the Surface with Micro Fiber Mop: Vigorously rub micro fiber mop with direction of the grain. (Always maintain a “leading edge” with the mop head, turning when you get to walls – DO NOT “back up”, or you’ll leave dirt behind.) When the applicator is showing dirt, either replace with a clean one or rinse and wring out well. Launder mop heads after every use (DO NOT use fabric softener, including on dryer sheets – these can contaminate the mop head and interfere with Refresh application).
6. Test small area in traffic area: Spray a small area with TrueClean® and rub with a clean, white, terry cloth towel. If the towel is still showing dirt, the floor must be cleaned again. Refresh cannot be applied until test areas come back clean. Repeat the cleaning process until no dirt can be removed from surface with the towel test. Failure to get the floor clean will trap dirt under ReFresh and a hazy floor will be the result.
7. Lightly poor a small amount of Surface Guardian Refresh on the floor: Pour in a thin line onto the floor. Use a Micro Fiber Mop and apply a thin film of ReFresh to the surface of the floor. Do not use too much to avoid leaving puddles on the floor. Using the micro fiber mop, apply the ReFresh in a motion that follows the lengthwise grain of the floor. Apply evenly for best results. Do not apply across the grain of the plank. On tile, pick a direction, and apply in only that direction.